Whitmor 9 Cube Storage Organizer Shelf - Espresso Finish, Closet & Home Organization for Bedroom, Living Room, Office - Perfect for Storing Toys, Books, Shoes & Decor

Update:Go ahead and buy this unit. Just understand the quality and only attempt something that stresses it once all boards are fully assembled on a horizontal surface and screwed in. I should have known something was up when the package showed up marked as Fragile! :)I changed this review from 1 to 5 because the customer service people at Whitmor are actual humans who want to give the customer a good experience. They were understanding of my situation in this exact case and also that the instructions didn't make it clear that the thing needs to make it past step 6 (screws in the side boards) before it can be moved.In this instance, I didn't have enough space and had to move it before the critical "screws" step.The dowels are apparently just there to somewhat hold things in place till the screws anchor it all Only the vertical side boards (same material) are intended to take the distributed weight of the unit. Every force must only be straight down. For example, even with it glued, there is no chance of it withstanding a lateral force.In the end, we agreed both parties could have done better. They let me keep the somewhat mangled one and sent me a new one. I can use them for light weight storage where they won't be bumped by anything.I'm happy with the compromise.------------Original:—--------The panel board needs to be much thicker and higher quality. The unit barely stands up to its own weight. The dowels provided are too short and not large enough in diameter for the task. However, the holes drilled are large enough such that there is wobble and only about 2-3mm of particle board supporting the dowels. Also, the particle board looks more like a sponge than wood.To top that off, it seems the varying position of the pre-drilled holes side-to-side on the panel boards also applies to the angle the holes are drilled.It seems they used the hole to dowel size difference to handle the horrible drilling tolerances.The unit collapsed, breaking nearly every dowel, the first time I tried to move it to put the “top” on. Re-drilling holes, and using glue to fix all the places the dowels broke through the panel boards is a nightmare.If this shelf ever gets together, it will be a slanted eyesore that can only hold about 1lb per “box”.I never expect Whitmor to be great quality, but they do tend to make it to the assembled state before falling apart.